epiphan Standalone VGA Grid User Manual Download

Page: 236 / 291

Standalone VGA Grid User Guide

7-5 Firmware Upgrade

7. Select the firmware upgrade file from your local computer.

8. Click

Apply

; the file is uploaded. The system unpacks and verifies the file. If the file is valid, the upgrade

begins.

Do not interrupt power to the system during the firmware upgrade.

9. Wait for the system to restart.

10. Connect to the admin interface using your preferred connection mechanism. See

Connect to the Admin

Interface

11. Login as admin.

12. Select the

Firmware Upgrade

link in the Configuration menu; the firmware upgrade page opens.

13. Verify that the firmware version is the expected new version.

Although unexpected, it is possible the firmware update fails. In this case, collect system information such as

device serial number and, if known, the previous firmware version along with the new firmware version and

contact [email protected]

224

Summary of Contents for Standalone VGA Grid




































































































































































































































































































Search results

Summary of Contents for Standalone VGA Grid

Reviews:

Related manuals for Standalone VGA Grid

Brands by name

Popular brands

epiphan Standalone VGA Grid, User Manual

Search results

Summary of Contents for Standalone VGA Grid

Reviews:

Related manuals for Standalone VGA Grid

Brands by name

Popular brands