epiphan Standalone VGA Grid User Manual Download

Page: 30 / 291

Standalone VGA Grid User Guide

1-1 Connect to the Admin Interface

Connect via Persistent Static IP Address

This section discusses how to directly connect to the Standalone VGA Grid using the factory default persistent

network settings. Use this method if your network does not have a DHCP server or if you prefer to connect

directly to the system for initial configuration.

To perform this procedure you will need a workstation computer for which you are able to modify network

settings.

The Standalone VGA Grid is pre-configured with the following static address defaults:

IP Address:

192.168.255.250

Netmask:

255.255.255.252

User Name:

admin

Password:

your admin password (by default set to no password)

To access the Standalone VGA Grid's web interface via the persistent static IP address:

1. Establish an Ethernet connection between the Standalone VGA Grid and the workstation by one of the

following methods:

a. Connect the system to a local Ethernet network shared with the workstation.

b. Connect the system directly to the workstation’s Ethernet port using either a regular or a

crossover Ethernet cable.

2. Record the network settings of the workstation being used to connect to the Standalone VGA Grid so

that they can be restored later.

3. Temporarily change the network configuration on the workstation to the following:

a. Use Static IP assignment

b. IP address: 192.168.255.249

c. Subnet mask: 255.255.255.252

4. Start a web browser on the workstation and browse to:

http://192.168.255.250/admin/

5. Log in as the administrator user with the user name admin and the admin password (by default there is

no password); the web interface page opens.

6. Click the

Networking

link in the Configuration menu.

7. Select the radio button to

use a static address

and configure the system with a static IP address and

network settings relevant to the network being used. For specific details about the settings presented,

see

Configure Network Settings

8. Restore the previously saved network configurations on the workstation.

Summary of Contents for Standalone VGA Grid




































































































































































































































































































Search results

Summary of Contents for Standalone VGA Grid

Reviews:

Related manuals for Standalone VGA Grid

Brands by name

Popular brands

epiphan Standalone VGA Grid, User Manual

Search results

Summary of Contents for Standalone VGA Grid

Reviews:

Related manuals for Standalone VGA Grid

Brands by name

Popular brands