Standalone VGA Grid User Guide
7-10 Configuration Keys for Third Party APIs
Key
Values
Description
pll
-999...999
Specifies PLL adjustment.
Changes the number of pixels in the line.
tune_interval
0...9999
Specifies the number of seconds between auto-adjustments.
To disable auto-adjustments, set to 0.
vshift
-20...20
Specifies vertical shift.
For shifts up, use positive values.
For shifts down, use negative values.
Broadcast Configuration Keys
The following broadcast configuration settings are supported.
Table 41
Supported Broadcast Configuration Keys
Key
Values
Description
bcast_disabled
on
empty string ("")
Enables or disables the broadcast.
To disable broadcast, set to on.
To enable broadcast, set to empty string ("").
rtsp_port
1000...65535,
but not 5557
Specifies the port for RTSP streaming. Note port 5557 is used for
network discovery and cannot be used for streaming.
streamport
1000...65535,
but not 5557
Specifies the port used for streaming. Note port 5557 is used for
network discovery and cannot be used for streaming.
Channel Encoder Configuration Keys
The following channel encoder configuration settings are supported. For more information on individual items
listed, see
Create and configure channels
.
Table 42
Supported Channel Encoder Configuration Keys
Key
Values
Description
autoframesize
on
empty string ("")
Enables or disables use of the current signal’s resolution as the
frame size. Is switched to off if a frame size is manually specified.
To use current signal’s frame size, set to on.
To specify frame size directly, set to empty string ("").
255
