epiphan Networked VGA Grid User Manual Download Page 320

Page: 320 / 387

Networked VGA Grid User
Guide

Restore factory configuration manually

1. Power down the system, if it is on.

2. Disconnect the power to the system.

3. Press and hold the Factory Reset button on the front of the system while you restore power to the

system; the blue LED illuminates.

4. Continue to hold the reset button until the blue light is extinguished and the green LED illuminates.

5. Release the reset button.

6. Wait for the system to reboot and begin re-configuration.

320

Summary of Contents for Networked VGA Grid




































































































































































































































































































































































































Search results

Summary of Contents for Networked VGA Grid

Reviews:

Brands by name

Popular brands

epiphan Networked VGA Grid, User Manual

Search results

Summary of Contents for Networked VGA Grid

Reviews:

Brands by name

Popular brands