epiphan Networked VGA Grid User Manual Download Page 307

Page: 307 / 387

Networked VGA Grid User Guide

Manage the AFU queue

Delete content in the AFU queue

Files can be deleted from the upload queue, either individually or as a group.

To remove content from the upload queue:

1. Navigate to the bottom of the upload queue and click

Empty Queue

to delete the entire upload

queue, or click the red 'X' icon at the end of each row to remove files individually.

Note that there is no confirmation prompt after pressing

Empty Queue

. Once pressed,

the queue is immediately deleted with no way to restore the queued files.

307

Summary of Contents for Networked VGA Grid




































































































































































































































































































































































































Search results

Summary of Contents for Networked VGA Grid

Reviews:

Brands by name

Popular brands

epiphan Networked VGA Grid, User Manual

Search results

Summary of Contents for Networked VGA Grid

Reviews:

Brands by name

Popular brands