epiphan Networked VGA Grid User Manual Download Page 198

Page: 198 / 387

Networked VGA Grid User Guide

Video looks squished (VGA sources only)

4. Compare the aspect ratio from the source with the aspect ratio from the Networked VGA Grid info

window. Confirm if there is a mismatch.

5. If there is a mismatch, go to the Encoding page for the channel and change the frame size to match the

frame size that is sent from the source. See

Configure encoding (custom local channels)

6. If the video is still squeezed horizontally on the screen, follow the steps below.

7. From the HD Encoder Admin panel, click

Frame Grabber

from the Configuration menu; the Frame

Grabber Adjustments page opens.

8. Scroll to the Aspect ratio setting.

9. Select

Wide mode

from the drop-down menu, when the source is wider than what is being displayed in

the preview or Live View.

10. Click

Apply

. To view the output, add the source to a channel and click the

View

link from the Info page.

198

Summary of Contents for Networked VGA Grid




































































































































































































































































































































































































Search results

Summary of Contents for Networked VGA Grid

Reviews:

Brands by name

Popular brands

epiphan Networked VGA Grid, User Manual

Search results

Summary of Contents for Networked VGA Grid

Reviews:

Brands by name

Popular brands