LiveScrypt User Guide
Monitor audio
Tap or swipe the headphone volume control on the bottom of the touch screen to adjust your volume.
Increasing the volume to 100% may cause you to hear distortion that is not actually present in
the audio signal being sent for transcription. At approximately 75% volume, you hear the nominal
audio level in the VU meter at approximately where the green bars change to yellow.
A mono VU meter on the touch screen shows the audio level of the combined audio signal. The value is
displayed in dBFS (decibels relative to full scale). Colored bars represent the audio level.
Similar audio VU meters appear in other places, like where you configure the audio gain in the Settings. To
adjust the gain, see
23
