LiveScrypt User Guide
Using the web interface
Icon
Description
transcription. The transcription appears only as speech is detected.
l
QR code
: A full screen QR code displays when you start transcription.
Access the Settings to configure the HDMI output options, audio sources, transcription
options, system and network options, and security features.
Reboot the device. Displays when a software update is available.
A headphone volume slider and VU meter appear along the bottom of the touch screen. For more
information, see
.
Using the web interface
The web interface is a convenient way for you to remotely monitor, configure, and control your LiveScrypt
device.
All screens and controls are exactly the same as the touch screen. Simply click and drag to scroll through lists
and select menus using a computer and mouse. Using a smart device or a touch-sensitive screen, you can tap
and swipe.
Throughout this user guide, follow the instructions to use the touch screen unless the instructions
specifically indicate there are alternate steps for the web interface. For an overview of icons and
controls on the screen, see
The IP address of your LiveScrypt device is needed to use the web interface. As well, the device must be
connected to a LAN with access to the Internet. To connect the device to the network, see
.
To use the web interface with your LiveScrypt device:
1. Get the IP address of the device. From the touch screen, tap the
Settings
(gear) icon and select
System
. Then scroll to the
Network
section.
7
