LiveScrypt User Guide
Monitor audio
The time a transcription session is paused is counted as billable time for that session.
To start, stop, and pause transcription using AV Studio:
1. Login to your AV Studio account at
2. Using AV Studio, select the
LiveScrypt
menu icon. The list of LiveScrypt devices opens.
3. In the row for the LiveScrypt device, select
Start transcription
.
4. Select
Stop transcription
when you're done.
5. (Alternative method) To start, stop, and pause transcription from the device Settings in AV Studio:
a. From the LiveScrypt list of devices, select a device name in the list to open the Settings for that
device.
b. Select
Start transcription
.
c. When you're done, select the red stop icon in the leftmost corner of the header bar. Or select the
pause icon and then restart the transcription when you're ready.
Monitor audio
Audio from all connected sources are combined into a mono signal. There's a 3.5 mm audio jack for
monitoring audio on the front panel of the LiveScrypt device. You can plug external speakers or headphones
into the 3.5 mm audio jack. The same mono signal is heard in the left and right headphone speakers.
22
