epiphan LiveScrypt, User Manual

Page: 6 / 90

LiveScrypt User Guide Get started
Get started
Welcome and thank you for buying Epiphan LiveScrypt™. You'll find all the information you need to set up
and use your new live transcription solution in this guide.
The Get started covers What is LiveScrypt? and gives an overview About your LiveScrypt device , as well as
the User interfaces . You'll also find the basic step-by-step procedures you need to get started transcribing
right away.
The rest of the guide covers custom options that are available from the LiveScrypt device settings - like
changing the transcription language, displaying a QR code so people can watch using their favorite smart
device, changing the font size and the look of the output display, and more.
The guide is divided into these main sections:
l
Get started
l
Display options
l
Transcription options
l
Network and system options
l
Security options
l
Troubleshooting and support
l
Billing and storage
Before you begin
To get started, you need your LiveScrypt transcription device, a LiveScrypt account, a network connection, and
at least one audio source - like a microphone. You can connect one or more audio sources to the LiveScrypt
device. LiveScrypt even accepts embedded audio from SDI, HDMI, and USB (UVC) video sources.
Here are six steps to quickly start transcribing using your LiveScrypt device.
Step 1 : Set up an AV Studio account and enable LiveScrypt transcription service. Valid credit card information
is required, see Create an account and enable transcription services .
Step 2 : After your account is setup, you should connect the LiveScrypt device to the network and power up
the device, see Connect the network and power on .
Step 3 : Next, connect your audio sources and check your levels, see Connect audio sources and check levels
1