LiveScrypt User Guide
Vesa mounting the device
Input port
Qty
Details
Connecting devices that are not designed for phantom power when phantom power is enabled
on the XLR ports can seriously damage those devices. Always check the phantom power LED
before connecting devices to the XLR ports. A direct box can be used to provide the correct mic-
level signal to the XLR port and offers some isolation protection in case of accidental exposure
to 48 V phantom power.
¼" TRS
3
2
Combo XLR/TRS audio inputs operate as individual mono inputs.
The ¼" TRS inputs accept balanced and unbalanced, pro line level
signals (+4.0 dBu) up to to 12.3 V
RMS
, +24 dBu.
1
SD-SDI audio is not supported
2
RCA/3.5 mm includes audio signals from the RCA audio pair and the 3.5 mm stereo audio inputs by default.
You can disable one or the other using the touch screen, the web interface, or AV Studio when your LiveScrypt
device is paired to your AV Studio team, see
Assign audio sources to an input
.
3
You cannot use both XLR audio inputs and the ¼" TRS audio inputs at the same time.
Vesa mounting the device
The rear panel of LiveScrypt has vesa mounting holes to fit a standard, 75mm × 75mm vesa mount. Use four
M4 screws with a maximum length of 5mm to mount the plate to the rear panel of LiveScrypt.
Do not insert screws longer than the recommended 5mm. Using longer screws can damage the
device.
Tech specs
The input and output connectors are listed for LiveScrypt.
70
