LiveScrypt User Guide
Set up a static IP address
Set up a static IP address
If your network doesn't use a DHCP server to dynamically identify devices connected to the network, you can
manually assign the LiveScrypt device a static IP address and set the network mask, default gateway, and DNS
server values using the touch screen or web interface. Only IPv4 addresses are supported. LiveScrypt does
not support IPv6.
Table 7
Static IP Address Fields
Label
Description
IP Address
Obtain a static IP address to assign the LiveScrypt device from your network
administrator. Only IPv4 addresses are supported. LiveScrypt does not support IPv6
addresses.
Network Mask
Also called the subnet mask, this value denotes a range of IP addresses. Obtain this
from your network administrator, from another computer on the same subnet, or
calculate the value using an online subnet calculator.
Default gateway
The network node that serves as an access point to the rest of the network. This value
cannot be blank unless you are using DCHP. Specify the system’s IP address if you
don’t have a default gateway on your network.
DNS Server
The domain name system server (DNS server) translates human-readable hostnames
into corresponding IP addresses. Specify the system’s IP address if you don’t have a
DNS server on your network. This value cannot be blank unless you are using DHCP.
This procedure applies to the touch screen and web interface. For instructions on how to access the web
interface, see
To set up a static IP address:
1. Select
Settings
and then select
System
to open the System menu.
2. In the Network section, toggle the DHCP switch off.
55
