66
Installation and Operating Instructions - SteamAttrac
EN Operation
Water filling fault
Water supply blocked.
Check water supply. Clean
the filter at the valve's water
supply connector if neces-
sary.
Water inlet valve blocked
or clogged.
Clean the valve and make
sure it is operational.
Steam generator does
not produce steam
(no heating)
Safety temperature lim-
iter triggered.
The safety temperature lim-
iter may have been triggered
by overheating in the vapor-
iser tank. Rectify the reason
for overheating.
Caution
: Allow the steam
generator to cool for 10–
15 minutes before resetting
the safety temperature lim-
iter. Press the Reset button.
Safety temperature
limiter triggered
(Display error mes-
sage)
Overheating in the water
tank
Rectify the reason for over-
heating.
Caution:
Allow the steam
generator to cool for 10–
15 minutes before resetting
the safety temperature lim-
iter. Press the Reset button.
Error
Reason
Solution
