38
Installation and Operating Instructions - SteamAttrac
EN Mounting
3.2.3
Mounting the steam pipe
The steam pipe is mounted on the steam emission outlet outside of the
housing. Before it can be mounted, the housing cover must be in place and
the right side panel must be mounted.
Necessary steps
Ha tools:
Ø 35 mm pipe, heat-resistant up to 110°C
SW38, SW48 and SW54 spanners
Commercial fitting hardware used in pipe installation
Connecting the steam pipe
1
Connect the steam pipe to the steam emission outlet.
A two-piece 1” brass union with 1”–1 ¼” reducer can be used (special
accessory, item no. 94.7003) to simplify the connection or subse-
quent disconnection of the steam pipe.
Steam pipe connection
Position the steam pipe so it slopes toward the steam outlet without
kinks.
