SteamAttrac - Installation and Operating Instructions
55
Operation
4
Remove the cover plug on the descaler filler spout and unscrew the seal-
ing plug using the SW8 hexagon key.
SW8 hexagon key (included in scope of delivery)
5
CAUTION! Risk of chemical burns from descaler. Use a funnel to pour in
the descaler; see Accessories (optional),
Pour in the descaler.
6
Screw the cover plug into the descaler filler spout and tighten.
7
Press the rocker switch to start descaling.
The
Descaling in progress
flashing code indicates that descaling is in
progress.
After approx. 30 minutes the water is drained. The tank is then filled
with clean water for a rinse cycle and drained again.
