36
Installation and Operating Instructions - SteamAttrac
EN Mounting
Mounting the motorised ball valve
1
Set the housing cover in place; see
Before setting the housing cover in place, connect the cables to the
control unit.
2
Loosen the motor's retaining screw.
Fixing screw
3
Remove the motor from the ball valve.
4
Seal the 1” threaded fitting on the drain outlet with sealing tape.
5
Mount the ball valve.
Align the ball valve in such a way that there is sufficient room to set
the motor in place.
6
Set the motor in place again and tighten the motor’s retaining screw.
You can then mount the drain outlet.
