Envent Engineering Ltd – 131S & 132S Software Manual – Revision 1
Page 43
Below the stream timer the analysis sequence can be found. The analysis
sequence shows which streams will be run after the current stream has finished.
At the bottom of the page are the control buttons, the table below describes the
function of each.
Run Analysis Sequence
Starts the GC and runs the current sequence
Reset Analysis Sequence Resets the analysis sequence to the default state
Halt
Halts the GC after the current run is finished
Run
Brings the GC out of idle mode and runs the current
analysis – this button also cancels a halt request
Clear Alarm Latches
Clears all latched alarms if they are out of alarm state
Summary of Contents for 131S
Page 2: ......
