Envent Engineering Ltd – 131S & 132S Software Manual – Revision 1
Page 12
3.3
Configuration of the Ethernet Interface
Envent ICE has a built-in system for configuration of the ethernet interface card. This configuration
should be done with the PC directly connected to the interface card and not through a network
switch, if possible.
1.
Determine the sub-network to which the analyzer is connected, ensure the user’s PC is on the
same network – even if the device is directly connected.
2.
Refer to the previous section to “scan” the network and find the analyzer on the network.
3.
In the Network menu, point at the device using the mouse cursor and select the “Edit…”
option.
4.
A dialogue menu will open, the new parameters of the network interface card can be
programmed here, once complete click the “Send Changes” button, this will alter the
configuration of the card.
5.
Confirm that the change worked by altering the user’s PC Network configuration to match the
analyzer and use ICE to “scan” the network (refer to the previous section).
Summary of Contents for 131S
Page 2: ......
