Envent Engineering Ltd – 131S & 132S Software Manual – Revision 1
Page 9
3.0
Connection Interfaces
3.1
Connection Via USB
The model 131S/132S gas chromatograph is supplied with a USB-Mini Type “B” connection interface.
This interface will be located on the top of the GC below the display (on the model 132S GC) or
underneath the explosion proof cap below the display (on the model 131S GC).
Ensure that the driver is installed properly; if the driver has been installed properly, the USB device
should show as a comm port in the device manager of the operating system. In Windows 7, 8, or 10 the
device manager can be found by navigating to the system’s control panel. For assistance with
installing the USB driver, contact Envent Support.
1.
Connect the USB cable from the PC to the gas chromatograph’s interface.
2.
In Envent ICE click the connection globe on the menu bar (
), select “USB-Speed” and the
correct communications port (in the screenshot below, COM7 was the selected port).
3.
Click the read button ( ) and monitor the connection bar at the bottom of the software’s
interface. The connection bar should indicate which port is open as well as a progress bar
indicating read progress. Once the connection bar has concluded then the software has
successfully read the parameters from the device.
Summary of Contents for 131S
Page 2: ......
