Entrust Artista CR875, Installation And Administrator'S Manual

Page: 95 / 150

CR825 and CE875 Instant Issuance System Installation and Administrator’s Guide 85
Flipper
The
Flipper
settings define values for the duplex module in duplex-option printers. Most Flipper
settings are available for WebService access-level users only. Contact your service provider for
assistance if you need to change the printer’s flipper settings.
WebAdmin access-level users can specify the number of cards that are allowed in the reject tray
before an error is issued.
Change the setting, as needed, and then click Set Current to apply the change.

RejectHopperCapacity —The number of cards allowed in the printer reject tray before the
reject tray full message is issued. The capacity of the reject hopper depends on the thickness
of the card stock being used.
Description Default Value
Current Value
(unit) Allowed Range
1) RejectHopperCapacity 6 6 [5 – 15]
If the system includes an additional component, such as an embosser, rejected
cards are placed in the component reject tray and the RejectHopperCapacity
setting does not apply.