Entrust Artista CR875, Installation And Administrator'S Manual

Page: 118 / 150

108 Printer Manager
5.
Place the isopropanol cleaning card in the card input hopper. If you are cleaning a printer
with a multi-hopper, insert the cleaning card in the exception slide.
6.
Select Maintenance > Cleaning .
7.
Select Clean Printer .
8.
Click Run to start the cleaning process. Press the U
SER
button on the printer when the
message “172: Insert cleaning card” displays on the LCD panel.
The printer picks the cleaning card and moves it through the printer several times, and ejects
it in the output hopper or places it in the card reject tray.
9.
Unlock the printer
10.
Remove the used cleaning card.
11.
Replace the cards in the input hopper.
12.
Install a new cleaning sleeve. Refer to “Install the Cleaning Sleeve” on page 24 .
13.
Replace the ink ribbon and retransfer film cartridges and close the printer access door. Lock
the printer.
If you are cleaning a CE875 system, the cleaning card moves into the embosser
after cleaning the printer and cleans the card entry area and embosser rollers.
The cleaning card is placed in the embosser reject tray. Open the embosser to
remove the cleaning card.