Entrust Artista CR875, Installation And Administrator'S Manual

Page: 87 / 150

CR825 and CE875 Instant Issuance System Installation and Administrator’s Guide 77
Update Current Values as needed, and then click Set Current to apply the changes.

ActivityLogExternal —Enable or disable writing the activity log to an external server.

ActivityLogInternal —Enable or disable the internal activity log.

CloudEnable —Enable or disable printer Cloud support.

ContactAutoDetect
—This setting supports legacy smart card clients. It overrides the smart
card protocol sent by the client to the printer and uses SCARD_PROTOCOL_T0_OR_T1. The
setting is set to
Disabled
by default.

ContactlessATRMode
—Select the default ATR mode for the DUALi contactless smart card
reader. The possible values are:

Vendor
—Uses the ATR mode specified by the vendor. The generated ATR may not be
compatible with all smart card applications or card types.

PCSC
—Uses the PC/SC protocol to generate the ATR.

CCID
—Uses the CCID protocol to generate the ATR.

Legacy
—Uses the ATR mode currently in use by the reader. This is the default value.

AppSpecifies
—Allows the smart card application to control the ATR mode.

DoorCloseLockTimeout —The number of seconds after all printer doors are closed before the
printer is locked. The timeout period starts when all the doors are closed. Use this setting to
override the default lock timeout period, which starts when the printer is unlocked
electronically from an application. This setting does not apply if you use a key to unlock the
printer.

DPCL —Enable or disable DPCL command access to the printer through the non-secure port.

DPCL2 —Enable or disable DPCL2 command access to the printer through the non-secure
port.

DPCL2Secure —Enable or disable DPCL2 command access to the printer through the secure
port.
You also can enable Cloud support using the printer LCD panel
Configuration
menu.
A smart card application may specify to receive the ATR in a different format
regardless of this setting. However, when the printer restarts, the smart card
reader returns to the setting specified here. Consider whether you want to
specify the format on a job-by-job basis or modify the Printer Manager setting
to use the desired ATR format.
To ensure that DPCL2Secure is always used for secure communication with the
printer, set DPCL2 to Disabled.