Entrust Artista CR875, Installation And Administrator'S Manual

Page: 113 / 150

CR825 and CE875 Instant Issuance System Installation and Administrator’s Guide 103
Set Job Queue State
Enter or select values prior to shipping the printer or system to or from repair facilities.
Do the following to change the job queue state:
1.
Enter the current password for the printer or system.
2.
Enter a new password for the printer or system.
3.
Re-enter the new password for verification.
4.
Select a state:

Online
—The printer performs normally.

Suspend
—Deactivates the printer, but allows for some exception jobs.

Offline
—Deactivates the printer for transportation.
5.
Click
Set Job Queue State
to apply the changes.
This setting is used primarily for financial printers. Contact your service provider
for more information.
Field Value Description
Current Password Enter the currently set password. Leave
the field blank if no password has been
set.
Next Password Enter a new password. A blank value
means that no password is required or
leaves the current password unchanged,
depending on the settings.
Confirm Next Password Re-enter the same value used in the Next
Password field.
State

Online

Suspend

Offline

StartJob succeeds if there is space in
the queue.

StartJob succeeds if there is space in
the queue and exceptionJob=true.

StartJob does not succeed under any
circumstances.
To change an “Offline” printer to “Online,” you must enter the same password that
was used to set it to “Offline.”