Entrust Artista CR875, Installation And Administrator'S Manual

Page: 100 / 150

90 Printer Manager
HeatRoller
The
HeatRoller
settings specify the time the printer is idle before it reduces its temperature and
when power to the heated roller is turned off.
Change settings as needed, and then click Set Current to apply the changes.

HeaterMinutesToLowPower —The number of minutes the printer is idle before the heated
roller reduces its temperature to the value specified in the LowPowerRollerTemp setting.
(The heated roller is turned off after the time specified in HeaterMinutesToPowerSave .)

HeaterMinutesToPowerSave —The number of minutes of printer idle time before the heated
roller is turned off. After waiting the specified number of minutes, the roller is allowed to
cool down. A value of 0 allows the roller to start cooling down immediately.
Using power save requires a brief warm-up period before the printer is ready to print cards
again. The front panel LCD displays the message
Busy Warming up and a percentage that
indicates the status of the heated roller.

LowPowerRollerTemp —The temperature to which the heated roller is lowered after the
number of minutes of idle time specified in HeaterMinutesToLowPower .
Description Default Value
Current Value
(unit) Allowed Range
1) HeaterMinutesToLowPower 5 5 [0 – 240]
2) HeaterMinutesToPowerSave 15 15 [0 – 240]
3) LowPowerRollerTemp 135 135 [20 – 160]