4
Technical specification
Ensure that the door operator with technical specification below is suitable for the installation.
Entrematic Group AB
Manufacturer:
Lodjursgatan 10, SE-261 44 Landskrona, Sweden
Address:
EM SW EMO
Type:
100-240 V AC +10/-15%, 50/60 Hz
Mains power supply:
Note! The mains power supply shall be installed with protection
and an all-pole mains switch with isolating capability of Category
III, at least 3 mm between contacts, shall be installed according to
local regulations. These articles are not provided with the door.
Max. 75 W
Power consumption:
24 V DC, max. 400 mA
Auxiliary voltage:
2 x T 6,3 AH 250 V
Mains fuse F1, F2:
Max. 1200 mm
Door width:
45-90 kg
Door weight:
For PUSH = 45 kg m
2
Max. Inertia J:
For PULL = 16 kg m
2
Inertia = Door weight x (Door width)
2
/ 3
Selectable: 12V DC, max. 500 mA / 24 V DC, max. 250 mA
Electro-mechanical locking
device:
PUSH arm: 80° - 110°, with reveal 0 - 100 mm (300 mm with longer
telescopic part)
Door opening angle:
PULL arm: 80° - 110°, with reveal 0 - 130 mm
variable between 3 - 6 seconds
Opening time (0° - 80°):
variable between 3 - 6 seconds
Closing time (90° - 10°):
1,5-30 seconds
HOLD open time:
-20 °C to +45 °C
Ambient temperature:
IP 20
Degree of protection:
IP54
Degree of protection, con-
trol actuators:
Max. 85%
Relative humidity
(non-condensing):
Third party approvals from established certification organizations
valid for safety in use, see Declaration of Incorporation.
Approvals:
9
Issue 2014-11-24
1005088-EMEI-11.0
4 Technical specification