Hardware Overview
22
Enterasys X-Pedition 8000/8600 Getting Started Guide
Options Available
This module operates with the following APHYs (you may purchase them separately from the
module) connected to the outside world. For information about these APHYs, consult the Enterasys
Networks web site.
Caution: The X-Pedition-APHY-21 and X-Pedition-APHY-29IR use Class 1 Lasers. Do not use
optical instruments to view laser output. The use of optical instruments to view laser output
increases eye hazard.
Note:
Before you can remove an APHY, Hot Swap the host ATM module.
The ATM line card has two available slots. Each slot accepts the following PHY interface modules:
Port type
Specification
APHY-67
•
1 DS-3/T-3 interface (BNC Coax); see APHY-67 and APHY-77
on page 81
for attaching cables
•
75 coaxial (RG-59B or equivalent) terminated with 75-ohm BNC
connectors
•
Maximum of 450 ft (137 m) of cable
APHY-77
•
1 E-3 interface (BNC); see APHY-67 and APHY-77
on page 81
for attaching cables
•
75 coaxial (RG-59B or equivalent) terminated with 75-ohm BNC
connectors
•
Maximum of 450 ft (137 m) of cable
APHY-82V
•
1 T-1 interface (UTP); see APHY-82V
on page 81
for attaching
cables
Note:
The APHY-82V is not a T1 interface. It merely allows you
to connect to a T1 CSU—the T1 CSU will allow you to
connect to a T1 circuit.
•
ITU-T G.703 for a symmetrical pair
•
100 ohm symmetrical pair
•
Maximum of 655 ft (200 m) of cable
•
0 through 6 dB loss at 200 m
APHY-67
PHY
APHY-77
PHY
APHY-82V
PHY
Summary of Contents for 8000/8600
Page 1: ...Getting Started Guide Revision Date 11 27 2002 8000 8600 9032552 16...
Page 8: ...vi Enterasys X Pedition 8000 8600 Getting Started Guide...
Page 116: ...104 Enterasys X Pedition 8000 8600 Getting Started Guide...
Page 142: ...Index 130 Enterasys X Pedition 8000 8600 Getting Started Guide...
