5/34
TEC/TEM owner manual
Figure 2.1.5
Figure 2.1.6
Pressing the up button again will show monthly (
) water saved by
displacing electricity generation; press again for yearly (
), and once more
for cumulative (
). Pressing up from the cumulative value will display
instantaneous power (see section 2.2.8).
2.1.5 Solar energy delivered
Pressing the up button from
minimum hot-outlet temperature (see
section 2.2.7) will show “daily energy
delivered”, which is the amount of solar
energy delivered by the EnerWorks
appliance today (see figure 2.1.5).
Energy production is based on the
amount of power (see section 2.2.8)
generated over a period of time, given
in units of thermal Watt-hours (Wh
th
).
For simplification, the display truncates
the “th” subscript. Figure 2.1.5 is an example of a daily delivery, 8 219 Wh (or
8.219 kWh).
Pressing the up button again will show monthly (
) solar energy
delivered; press again for yearly (
), and once more for cumulative (
).
2.1.6 Auxiliary energy consumed – Space-Saver
™
Appliance
Pressing the up button from
cumulative energy produced (see
section 2.1.5) will display “daily
equivalent energy offset for auxiliary
fuel” (see section 2.1.7) for the
EnerWorks High Performance Appliance.
Since the EnerWorks Space-Saver™
Appliance uses electricity within the
same tank as the solar storage, the
Thermal Energy Controller and Thermal
Energy Monitor for these single-tank
appliances will show “daily auxiliary
