27/34
TEC/TEM owner manual
26.
- Communication between the Thermal Energy Controller and the
Thermal Energy Monitor. This icon will display on the Thermal Energy Monitor
when there is communication between the Thermal Energy Controller and the
Thermal Energy Monitor. If communication is fading or non-existent, this icon
will blink on the Thermal Energy Monitor.
27.
- Low-battery warning. If the batteries in the Monitor are getting low
and need to be replaced, this icon will appear.
28.
- Time interval and calendar. “1” = day, “31” = month,
“365” = year, “
∑
” = cumulative. The three calendar pages are used for daily,
monthly, and yearly data outputs as well as representing the day, month, and
year of a date. The cumulative icon is for outputs gathered from commissioning
date.
29.
- Fuel types. The four auxiliary heating sources are,
respectively, electricity, natural gas, heating oil, and propane. These symbols
are used for setting energy prices and for displaying energy equivalency to the
solar offset.
30.
- Water used. This icon shows up along with L or US gal to show how
much water has been delivered through the EnerWorks solar water-heating
appliance.
31.
- Water saved. This icon shows up along with L or US gal to show how
much water has been saved by offsetting electricity (only). It’s also used for
setting the amount of water needed to generate one unit of electricity.
