20/34
TEC/TEM owner manual
4.0 Date/time menu (Thermal Energy Controller)
There is a third menu in which you can set the date and time, and
reset the historic maximum and minimum values that are stored. To get
to the date/time menu, press the menu button twice from the outputs
menu. The
icon will light up to indicate that you are in a
programming mode. Pressing the menu button again from any display will
return to the outputs menu and will not reset the settings. Use the up and
down buttons to toggle values, and the enter button to accept the value
for the current item and move to the next item.
Note that the status of the system will not be displayed while in
programming mode.
4.1 Setting up the system time/date
4.1.1 System time
The first screen for setting the time asks whether the time format should
be in 12-hour format or 24-hour format. Pressing the up or down button will
switch between the two selections:
Figure 4.1.1
Press the enter button to accept the time format. The time can then be
set up by using the up and down buttons to scroll through the hour. Press enter
to accept the hour, and then use up and down to set the minutes. Press enter
to accept. The screen will move next to setting the date.
Menu button
Up button
Down button
Enter button
