EnerSys OutBack POWER Mojave OGHI8048A, Operator'S Manual

Page: 24 / 116

24
900-00275-01-001 Rev A ©2021 OutBack Power. All Rights Reserved.
User Interface
Network Tab
This tab shows the information for connection to a personal computer or network. As these settings
can be customized (see page 36), not all items may match what is shown here.
Wireless — The connection state when using a wireless (“wi-fi”) network connection.

Disabled — The configuration has manually disabled the connection.

Disconnected — The wireless interface is enabled but is not able to connect.

Connected — The interface is enabled and connected.

Limited — The interface has a connection to the local network, but cannot reach external resources,
such as internet.
SSID — Service Set IDentifier; the designated name of the user’s wireless network.
IP Address — Internet Protocol address; the unique identifier assigned to the Mojave inverter.
Netmask
— The subnet “mask” assigned to the Mojave inverter.
Gateway — The IP address of the device used to transfer requests between internet and local network.
This often refers to the system’s router.
Wired — The connection state when using a wired (cable) network connection.

Disabled — The configuration has manually disabled the connection.

Disconnected — The wireless interface is enabled but is not able to connect.

Connected — The interface is enabled and connected.

Limited — The interface has a connection to the local network, but cannot reach external resources,
such as internet.
IP Address — Internet Protocol address; the unique identifier assigned to the Mojave inverter.
Netmask — The subnet “mask” assigned to the Mojave inverter.
Gateway
— The IP address of the device used to transfer requests between internet and local network.
This often refers to the system’s router.
DNS1
and
DNS2
— Domain Name Server; the
IP
addresses for the first and second servers used to
resolve domain names into IP addresses.
MAC Address — The unique address of the Mojave inverter hardware; used to register with OPTICS RE.
See page 28.
OpticsRE — The status of connection to the OPTICS RE website. See page 28.

Disconnected — The inverter is not communicating with the OPTICS RE website

Connected — The inverter is communicating with the OPTICS RE website.