900-00275-01-001 Rev A
95
Service
Replacement of Fan Module
To replace the fan module (SPARE-508):
1. Remove the two fan plugs at the top of the carrier board. See
A
in the Figure 46 inset. If necessary,
loosen the power module cage cover at
B
to allow access to the plugs.
2. Using a #2 Phillips screwdriver, remove the two screws securing the fan module. See
C
in Figure 46
.
3. Slide the fan module out of its slot in the direction indicated by
D
in Figure 46. Note that the module will
have to slide under the transformer cables
E
, which have not been removed.
Figure 46 Fan Module
4. Replace the fan module. Perform all previous steps in reverse order. See Figure 46.
Insert the fan module by passing it under the transformer cables
E
.
Replace the screws
C
.
Replace the connectors
A
. (Replace the screws
B
if loosened.)
.
Replacement is complete.
A
C
D
C
A
E
B
B
Summary of Contents for OutBack POWER Mojave OGHI8048A
