EnerSys OutBack POWER Mojave OGHI8048A, Operator'S Manual

Page: 23 / 116

900-00275-01-001 Rev A
23
User Interface
Additional items under the
Generator
tab:
Power
— The power in watts (W) being imported from the generator.
Frequency — The frequency in hertz (Hz) measured at the inverter’s L1 and L2 G
EN
terminals.
Voltage L1 and Voltage L2 — The voltage in AC volts (Vac) measured at the inverter’s L1 and L2
G
EN
terminals.
Current L1
and
Current L2
— The current in AC amperes (Aac) measured at the inverter’s L1 and L2
G
EN
terminals.
AGS Status

Enabled — The AGS function has been activated in the Actions Menu and also in AGS under the
Generator tab. (See pages 25, 70, and 75.) It is waiting for proper conditions to start the generator.

Disabled — The AGS function has been been deactivated in the Actions Menu, in the Generator
tab, or both. The generator may be started manually, but it will not start automatically.
Timer — The timer that runs when the Status is Warming Up , Connected , or Cooling Down .
Info
— This item lists a series of messages providing additional information to system operation. AGS
conditions will appear here. A common message is Gen going through warmup period . If the generator
is not in use, this item will read None . When Error is present as a Status , the specific name of the error
(such as At Minimum SOC setting ) will appear here.
See the
EVENTS
view on page 27 and
Troubleshooting
on page 79 for more information on symptoms
and errors.