EnerSys OutBack POWER Mojave OGHI8048A, Operator'S Manual

Page: 18 / 116

18
900-00275-01-001 Rev A ©2021 OutBack Power. All Rights Reserved.
User Interface
Inverter Tab
Figure 5 User Interface (Inverter tab, STATUS view)
This tab shows basic inverter output information. The first item is inverter
Status
:

ON : Inverter set to On in ACTIONS . See page 25.

OFF : Inverter set to Off in ACTIONS .

Error : Shutdown due to a critical issue. See the EVENTS view on page 27 and Troubleshooting on
page 79 for more information on symptoms and errors.
Power
— The power in watts (W) being exported using the inverting function.
Frequency
— The frequency in hertz (Hz) delivered by the internal frequency control.
Voltage L1 — The voltage in AC volts (Vac) measured at the inverter’s L1 L
OAD
terminal.
Voltage L2 — The voltage in AC volts (Vac) measured at the inverter’s L2 L
OAD
terminal.
Current L1 — The current in AC amperes (Aac) measured as imported or exported at the inverter’s
L1
L
OAD
terminal.
Current L2 — The current in AC amperes (Aac) measured as imported or exported at the inverter’s
L2 L
OAD
terminal.
Info
— This item lists a series of messages providing additional information to what is shown in
Status
.
A common message is
Performing Energy Management
(when the
Time of Use
function is operating).
It is equally common for this item to read None . When Error is present as a Status , the specific name of
the error will appear here.
See the EVENTS view on page 27 and Troubleshooting on page 79 for more information on symptoms
and errors.