ENERGREEN RoboMAX, Use And Maintenance Instruction Manual, Page: 91 / 105

83
© 2017 Energreen Srl
Professional machinery
9.6 - MAINTENANCE OF THE HYDRAULIC SYSTEM
9.6.1 - CHECK OF THE HYDRAULIC OIL LEVEL
The hydraulic oil level can be checked by looking
at the indicator (A) on the hydraulic oil tank
located on the left-hand side of the machine. To
check the oil, the machine must be on a level
surface. The oil level must be between the MIN
and MAX marks. Top up if the level of the oil is
near to the MIN mark.
To top up, unscrew the cap (B), with the relevant
safety key (C) provided, and top up with oil until
the level has been restored. Close the cap.
Check the oil level every day .
• Do not top up oil beyond the MAX level, this could cause oil to leak from the tank.
• Restore the level only using the hydraulic oil shown in the table (see 9.4).
• When using biodegradable Panolin HLP Synth E oil , avoid mixing it with other oils.
• The use of non recommended lubricants and/or grease results in the forfeiture of the warranty.
CAUTION:
DANGER:
Use protective clothes when topping up.
A
B
C