ENERGREEN RoboMAX, Use And Maintenance Instruction Manual, Page: 21 / 105

13
© 2017 Energreen Srl
Professional machinery
3.2.1 - SAFETY WARNINGS
The machine has been designed and constructed according to the current state of the art and
technical standards for mowing grass, cutting hedges, maintenance of road verges, slopes, canals,
drainage ditches etc... . Observe the laws, dispositions, prescriptions, ordinances and directives in
force for such machines.
The materials used and the equipment parts, as well as the production procedures, quality
guarantee and checks meet the highest safety and reliability standards.
If the machine is used for the purposes specified in this manual, manoeuvred with care and
maintenance and servicing is carried out carefully and correctly, the machine can provide constant
reliability and high performance over time.
3.2.2 SAFETY REQUIREMENTS FOR ROAD TRAVEL
The manufacturer accepts no liability for accidents whilst the machine is being used if the
user does not comply with current legislation, directives, recommendations and regulations for
machines used for mowing grass, shrubs, the maintenance of roadside verges, slopes, canals,
drainage ditches etc...
The machine has been designed to work in normal weather conditions with temperatures between
- 10°C and +40°C so it must only work in these environmental conditions.
As regards the mowing on public roads, please refer to the instructions given by the work
supervisor as this is a mobile site.
Check that the overall dimensions shown in the technical data comply with the standards that
regulate the road travel in the country the machine is used in.
WARNING:
3.2.3 - OPERATION SAFETY
The manufacturer cannot be held responsible in case of malfunction and damage if the machine:
• is used for purposes other than those for which it was intended;
• is not manoeuvred, operated and maintained according to the instructions specified in the
following manual;
• is not regularly and periodically maintained as indicated, or non-genuine spare parts are used;
• is modified or its equipment is replaced without the written permission of the manufacturer,
especially when the efficiency of the safety systems has been reduced or has intentionally
been removed;.
• is used outside the permitted temperature range;
3.2.4 - SAFETY WHEN USING GRASS MOWING EQUIPMENT
• Before using the machine, remove from the mowing area all stones, sticks, glass, metal wires,
bones, branches and any other objects that could be collected and tossed around by the flail
rotor or that could damage the mower.
• Avoid obstacles during machine operation. Do not use the machine near steep slopes,
unstable terrain or areas in which it could tip over.