48
© 2017 Energreen Srl
Professional machinery
6.6.6 - MODE CHANGE SCREEN (OPTIONAL)
4
3
2
1
+/- : change values
Esc: Select value
Ent: confirm
A
+/- : change values
Ent: confirm
1
2
3
B
It is optionally possible to set three
different modes of operation for the
RoboMAX, according to the type of
work to be carried out.
It is possible to access the menu in
the following way:
• Scrolling in the menu with the UP
and DOWN arrows to the screen
(A).
•
Enter the numerical code (
1234
)
provided when the machine
was purchased, or contact the
ENERGREEN Customer Care
Service, then press ENTER.
•
This accesses the screen (B) in
which it will be possible to select
modes (1), (2) or (3) using the
UP and DOWN buttons; press
ENTER to confirm the mode
required.
6.6.7 - REGENERATION SCREEN
All the buttons and indicators that are seen and used for the DPF cleaning process, which is either
started automatically, or by the operator, and for disabling it are described below.
1
2
3
4
5
6
Symbol
1
DPF cleaning in progress
2
DPF regeneration request
3
Engine warning
4
Stop engine
5
DPF regeneration go-ahead
6
DPF regeneration inhibited
NOTE:
The diagnostics screen is never seen with all the lights on at the same time, as shown. The
figure serves only as an illustration of indicators that might be seen during operation.
1. DPF CLEANING IN PROGRESS:
• Appears during stationary regeneration.
•
Disappears when regeneration has finished.
2. DPF REGENERATION REQUEST:
•
Appears when the ECU (diesel engine control unit) determines that stationary regeneration is
required. Press the start stationary regeneration request button.
• The indicator disappears when stationary regeneration starts.
Summary of Contents for RoboMAX
Page 2: ......
Page 104: ...96 2017 Energreen Srl Professional machinery 12 NOTES...