11
© 2017 Energreen Srl
Professional machinery
3.1.4 - NOTICES FOR INSPECTION AND MAINTENANCE
Place a card saying
UNDER MAINTENANCE
on the machine. Remove the keys from the ignition
before performing any checks or maintenance.
3.1.5 - CHECKING THE MACHINE'
•
Inspect the machine thoroughly every day before using it, following the checklist indicated in
this manual.
•
Start the engine only in a well ventilated area and ensure that there are no persons in the
machine's working range.
•
Covers and safety devices must not be removed. They are designed and manufactured for
your safety.
•
Do not use the machine if the safety devices or covers are damaged or missing.
•
Make sure all safety devices are put back in place immediately after cleaning or repair work
has been carried out.
•
Keep the machine and all its accessories clean and in good working order at all times.
•
It is strictly prohibited to make changes to the machine without the prior authorisation of the
manufacturer. Changes to the machine can cause hazards and injuries. - The manufacturer
shall not be held responsible for the machine if these instructions are not followed.
•
Only refuel when the machine is switched off, if possible before having turned it on, and when
the fuel tank is cold. If you need to refuel whilst work is in progress, do not add fuel to the tank
if the tank is hot or if the engine is still warm. Allow the machine to cool down.
UNDER
MAINTENANCE
Summary of Contents for RoboMAX
Page 2: ......
Page 104: ...96 2017 Energreen Srl Professional machinery 12 NOTES...