18
© 2017 Energreen Srl
Professional machinery
1. Adapt the speed to the conditions of the travel path.
2. Before beginning work, check that all the movements of the protective devices are functioning
properly.
3. Check that the emergency stop devices are in perfect working order (on the remote control
and the fuse box).
4. Continually make sure that there are no people in the machine danger area (they must stay
more than 100 m away). Shout an alert, sound your horn to warn people and stop work if
these people do not leave the danger area.
5. Do not allow anyone to climb onto the machine.
6. Do not use the machine to lift persons.
7. Never leave the operating position when the machine is on.
8. If for some reason the rotor of the equipment begins to shake, stop the machine
immediately
and reestablish balance, Energreen declines all liability towards people and things due to the
operator's non compliance.
9. Clean the machine after use. Do not use petrol or solvent-based products to clean the
machine.
10. During operation, and in particular in windy conditions, the user must carefully choose his
position in order not to be exposed to exhaust gases, dust or mown grass.
11. Do not operate the equipment if you are unable to see it (behind ridges, round corners of
buildings, in tall grass etc...).
•
Due to vibrations, regularly check that all screw connections are firmly tightened.
•
This check must be carried for the first time after eight hours of operation and repeated
at least weekly.
WARNING:
•
Do not clean electrical parts with water under pressure.
•
Cover electrical parts with a plastic bag to protect them during washing.
WARNING:
3.3.2 - SAFETY DURING FILLING AND TOPPING UP
•
Fuel, oil and some types of anti-freeze are highly
flammable.
•
Keep away from naked flames.
•
Turn off the engine and do not smoke when fuelling up.
•
Fuel up only when the engine is off and in a well-ventilated
area.
•
Do not let unauthorised persons come near.
•
During filling, hold the fuel pump pistol or the jerry can and
keep them always touching the fuel filler hole until the filling
operation is over to avoid sparks due to static electricity.
•
When refuelling is complete, tighten the safety caps.
Summary of Contents for RoboMAX
Page 2: ......
Page 104: ...96 2017 Energreen Srl Professional machinery 12 NOTES...