ENERGREEN RoboMAX, Use And Maintenance Instruction Manual, Page: 62 / 105

54
© 2017 Energreen Srl
Professional machinery
3. From the menu shown in Figure 1 , press
the DOWN button twice (see section 6.9.1)
to access the forced regeneration menu
Figure 2 , then press the ENTER button for
a few seconds (see Figure 2 ).
Figure 2: Regeneration menu
A
B
Figure 3
C
Figure 4
4. At this point, an indicator (A) ( Figure 3 ) appears, prompting you to confirm the activation of
the regeneration function. The indicator (B) will then start to flash. To confirm the activation,
press and hold the ENTER button (see section 6.9.1) for a few seconds until the indicator
(C) appears ( Figure 4 ).
5. The machine will now start the forced stationary regeneration process.
6. Do not move the machine stationary until the regeneration process has ended.
To disable forced stationary regeneration proceed as follows:
To disable this process, simply press the
HOME button (see section 6.9.1); the indicator
above the button will turn red. Press the HOME
button again to enable the system.