75
© 2017 Energreen Srl
Professional machinery
DANGER:
•
Do not carry out these operations if the engine has just been switched off. Wait until
the engine becomes warm (40-45°C).
•
The oil spilled during the change can cause personnel to slip. Wear protective cloth
-
ing and anti-slipping shoes and immediately remove any traces of oil.
•
Since the oil and filter are considered special waste, they must be disposed of ac
-
cording to the antipollution regulations in force.
9.5.3 - COOLANT LEVEL CHECK
Checking the coolant level
The coolant level must be
checked daily
on the tank
after having released the catches and opened the hood.
Top it up as in the figure if required. To restore the level,
open the cap (A) and top up.
MIN
MAX
A
DANGER:
Explosive release of fluids from pressurised cooling system can cause serious burns.
•
Stop the engine.
•
Only remove the filler cap when the engine is cold or when it is cool enough to
touch with bare hands.
•
Before removing the cap, loosen the cap slowly to the first stop to relieve the
pressure. There can be a danger of ejection of the pressurised fluid at high
temperatures.
•
The check must be carried out with the machine parked on level ground with the
engine stopped and the equipment on the ground.
•
The coolant contains antifreeze and it is inflammable. Do not use naked flames
around it it and do not smoke while topping up.
•
If the level is too low, it can cause irreparable damage to the engine.
•
Pressurised tank.
•
Do not open the cap when the engine is hot.
WARNING:
Summary of Contents for RoboMAX
Page 2: ......
Page 104: ...96 2017 Energreen Srl Professional machinery 12 NOTES...