Operating Instructions
J22 TDLAS Gas Analyzer
84
Hauser
Parameter overview with brief description
Parameter
Description
User entry
Factory setting
I/O module 1 to n terminal
numbers
Shows the terminal numbers
used by the I/O module.
•
Not used
•
26-27 (I/O 1)
•
24-25 (I/O 2)
•
22-23 (I/O 3)
1
-
I/O module 1 to n
information
Shows information of the
plugged I/O module.
•
Not plugged
•
Invalid
•
Not configurable
•
Configurable
-
I/O module 1 to n type
Shows the I/O module type.
•
Off
•
Current output
•
Switch output
2
-
Apply I/O configuration
Apply parameterization of the
freely configurable I/O module.
•
No
•
Yes
No
8.3.2
Using parameters for device administration
The
Administration
submenu systematically guides the user through all the parameters that can be used for device
administration purposes.
Navigation
Setup menu → Advanced setup → Administration
▸
Administration
Device reset
▸
Define access code
▸
Reset access code
8.3.2.1
Resetting the device
Navigation
Setup menu → Advanced setup → Administration → Device reset
Parameter overview with brief description
Parameter
Description
User entry
Factory setting
Device reset
Reset the device configuration, either
entirely or in part, to a defined state.
•
Cancel
•
Restart device
Cancel
8.3.2.2
Defining the access code
Navigation
Setup menu → Advanced setup → Administration → Define access code
▸
Define access code
Define access code
Confirm access code
1
Based on order configuration
2
Visibility depends on order options or device setting
