J22 TDLAS Gas Analyzer
Operating Instructions
Hauser
119
Materials
1.
Optical head assembly
2.
O-ring, Viton
3.
Tapered vinyl plug
The O-ring (item 2) is installed in the O-ring groove within the optical head enclosure. Lightly grease the O-ring
before installing.
Grease the O-ring (item 2) with Syntheso Glep 1, or equivalent, before installation.
NACE and MTR reports available upon request.
11.5.7
Digital pressure sensor, E+H material number 70188825 (SS P/N 1100002239)
Materials
1.
Pressure sensor, digital
2.
Cable assembly, pressure, digital
Grease the pressure sensors thread with Syntheso Glep 1, or equivalent, before installation.
CRN compliant component.
11.5.8
Spectrometer seals, E+H material number 70188826 (SS P/N 1100002240)
Materials
1.
O-ring, Viton, #159, 4.987 x 0.103
2.
O-ring, Viton, #164, 6.237 x 0.103
3.
O-ring, Viton, #025, 1.176 x 0.070
4.
O-ring, Viton, 1 x 0.070
O-ring (item 1) is installed onto the cover, optical head enclosure.
O-ring (item 2) is installed onto the optical head enclosure.
O-ring (item 3) is installed onto the cell tube assembly.
O-ring (item 4) is installed onto the 0.1 m metal mirror.
Grease all O-rings with Syntheso Glep 1, or equivalent, before installation.
