Operating Instructions
J22 TDLAS Gas Analyzer
100
Hauser
Options
Description
Restart device
The restart resets every parameter whose data are in the volatile memory (RAM) to the Factory setting
(e.g., measured value data). The device configuration remains unchanged.
9.10
Device information
The Device information submenu contains all parameters that display different information for device identification.
Navigation
Diagnostics menu → Device information
Device information
Device tag
Serial number
Firmware version
Device name
Order code
Extended order code 1
Extended order code 2
ENP version
Parameter overview with brief description
Parameter Description
User entry
Factory
setting
Device tag
Shows name of measuring point.
Max. 32 characters, such as letters,
numbers or special characters (e.g., @, %,
/).
J22 H
2
O MB
Serial
number
Shows the serial number of the measuring device. A maximum of 11-digit character string
comprising letters and numbers.
–
Firmware
version
Shows the device firmware version installed.
Character string in the format: xx.yy.zz
–
Device
name
Shows the name of the controller.
The name can also be found on the analyzer
nameplate.
J22 H
2
O
–
Order code
Shows the device order code.
The order code can be found on the analyzer
nameplate in the “Order code” field.
Character string composed of letters,
numbers and certain punctuation marks
(e.g., /).
–
Extended
order code
1
Shows the 1st part of the extended order code.
The order code can also be found on the analyzer
nameplate in the in the “Ext. ord. cd.” field.
Character string
–
Extended
order code
2
Shows the 2nd part of the extended order code.
The order code can also be found on the analyzer
nameplate in the in the “Ext. ord. cd.” field.
Character string
–
ENP
version
Shows the version of the electronic nameplate
(ENP).
Character string
2.02.00
9.11
Signal alarms
Depending on the interface, failure information is displayed as follows:
