manualshive.com logo in svg

Endress+Hauser RA33, Operating Instructions Manual

Share
Download
Endress+Hauser RA33 Operating Instructions Manual Download Page 56

Technical data

Batch Controller RA33

56

Hauser

Modbus TCP

The Modbus TCP interface is optional, and cannot be ordered with other optional interfaces. It is 
used to connect the device to higher-order systems to transmit all measured values and process 
values. The Modbus TCP interface is physically identical to the Ethernet interface.

Modbus RTU

The Modbus RTU (RS-485) interface is optional, and cannot be ordered with other optional 
interfaces.
It is galvanically isolated (testing voltage: 500 V) and used to connect the device to higher-order 
systems to transmit all measured values and process values. It is connected via a 3-pin plug-in 
terminal.

10.0.5

Performance characteristic

Reference operating 
conditions

• Power supply 230 V AC ± 10%; 50 Hz ± 0.5 Hz
• Warm-up time > 2 h
• Ambient temperature 25 °C ± 5 K (77 °F ± 9 °F)
• Humidity 39% ± 10% RH

Arithmetic unit

The system has a calculation cycle of 125 ms. The amount of medium that flows in the specified 
reaction times is reliably measured by the Batch Controller but can deviate by this amount from the 
preset fill quantity. Using the after-run correction function or reducing the flow for 1-stage batching 
increases the accuracy of the quantity transferred. The use of two batching stages allows for batching 
that is both fast and precise.

10.0.6

Installation

Installation instructions

Mounting location

Wall/pipe mounting, panel or top-hat rail as per IEC 60715

Orientation

The orientation is only determined by the legibility of the display.

10.0.7

Environment

Ambient temperature range

-20 to +60 °C (-4 to +140 °F)

Storage temperature

-30 to +70 °C (-22 to + 158 °F)

Climate class

As per IEC 60 654-1 Class B2, as per EN 1434 ambient class C

Electr. safety

As per IEC 61010-1, UL61010-1 and CAN C22.2 No 1010-1.
• Protection class II
• Overvoltage category II
• Pollution degree 2
• Overload protection 

≤

 10 A

• Operating altitude: up to 3000 m above MSL

Degree of protection

• Panel mounting: IP65 front panel, IP20 rear panel
• Top-hat rail: IP20
• Field housing: IP66, NEMA4x (for cable gland with double seal insert: IP65)

Electromagnetic compatibility

As per EN 1434-4, EN 61326 series and NAMUR NE21

Summary of Contents for RA33



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands