manualshive.com logo in svg

Endress+Hauser Prosonic S FMU90, Description, Page: 69 / 216

Share
Download
Endress+Hauser Prosonic S FMU90 Description Download Page 69

The "safety settings" menu

69

4.6

"reaction high temperature"

4.6.1

"overtemperature sensor N" (N = 1 or 2)

Defines how the instrument reacts if the maximum temperature of the sensor is exceeded.

Selection:

•

warning (default)

If the maximum temperature is exceeded, an error message (A01661 or A02661) is generated 
but the measurement is continued.

•

alarm

If the maximum sensor temperture is exceeded, the output assumes a defined value ("output on 
alarm", see above). Additionally an error meassage (A01661 or A02661) is generated.

4.6.2

"maximum temperature sensor N" (N = 1 or 2)

Displays the maximum temperature of the respective sensor.

4.7

"defective temperature sensor"

4.7.1

"defective temperature sensor N" (N = 1 or 2)

Defines how the instrument reacts in the case of a defective temperature sensor.

Selection:

•

warning

If the temperature sensor is defective, an error message (A01661 or A02661) is generated but the 
measurement is continued.

•

alarm (default)

If the temperature sensor is defective, the output assumes a defined value ("output on alarm", see 
above). Additionally an error meassage (A01661 or A02661) is generated.

⇒

react. high temp

AX107

overtemp sen 1:
max. temp. Sen. 1:
overtemp sen 2:
max. temp. Sen. 2:

⇒

def. temp. sensor

AX018

def. temp. sens 1
def. temp. sens 2

Summary of Contents for Prosonic S FMU90

























































































































































































































Reviews:

No comments