manualshive.com logo in svg

Endress+Hauser Prosonic S FMU90, Description, Page: 142 / 216

Share
Download
Endress+Hauser Prosonic S FMU90 Description Download Page 142

The "system information" menu

142

9.2

The "in/output info" submenu

17)

9.2.1

"level (LVL) N" (N = 1 or 2)

"input"

Indicates, which sensor input is connected to the level channel.

"sensor selection"

Displays the type of the connected sensor. For the sensors FDU9x, "automatic" is displayed, as these 
sensors are automatically detected by the transmitter (They have not to be spedified by the user.)

"detected"

(only for "sensor selection" = automatic")
Displays the type of the automatically detected sensor.

9.2.2

"flow N" (N = 1 or 2)

"input"

Indicates, which sensor input is connected to the flow channel.

"sensor selection"

Displays the type of the connected sensor. For the sensors FDU9x, "automatic" is displayed, as these 
sensors are automatically detected by the transmitter (They have not to be spedified by the user.)

"detected"

(only for "sensor selection" = automatic")
Displays the type of the automatically detected sensor.

17) 

This submenu can be accessed only by the display module (not by an operating software).

⇒

level (LVL) 1

IX107

input:
sensor selection:
detected:

⇒

flow 1

IX109

input:
sensor selection:
detected:

Summary of Contents for Prosonic S FMU90

























































































































































































































Reviews:

No comments