Endress+Hauser Prosonic S FMU90, Description, Page: 152 / 216

The "display" menu
152
"time"
This parameter is used for the options "value max. size" and "alter 3x2 values". It specifies the time
after which the next page appears.
!
Note!
To change to the next page immediately, press
.
"value 1" ... "value 6"
Use these parameters to allocate a measured or calculated value to each of the display values. The
selection depends on the instrument version and installation environment.
!
Note!
If "temp. sensor 1/2" is selected, depending on the setting in "sensor management/FDU sensor N"
one of the following is displayed:
• the sensor temperature
• the average of the sensor temperature and the temperature of the external temperature probe
• the temperature of the external temperature probe
"cust. text 1" ... "cust. text 6"
These parameters can be used to allocate a text string to each of the display values. This text is
displayed together with the value if
"customized text" (in the "display format" parameter set) has
been set to "yes" .
10.2 "display format"
"format"
Use this parameter to select the display format for numbers.
Selection:
• decimal (Default)
• ft-in-1/16"
"no. of decimals"
Use this parameter to select the number of decimals for the representation of numbers.
Selection:
• x
• x.x
• x.xx (Default)
• x.xxx
"sep. character"
Use this parameter to select the separation character for the representation of decimal numbers.
Selection:
• point (.) (Default)
• comma (,)
"customized text"
⇒
display format DX201
format:
no. of decimals:
sep. character:
customized text: