11 Description of device functions
Proline Prowirl 72
80
E Hauser
11.2.5
Group USER INTERFACE
Function description USER INTERFACE
ASSIGN LINE 1
Use this function to define which display value is assigned to the main line (top line of
the local display) for display during normal measuring operation.
Options:
OFF
FLOW
FLOW IN %
Factory setting:
FLOW
ASSIGN LINE 2
Use this function to define which display value is assigned to the additional line (bottom
line of the local display) for display during normal measuring operation.
Options:
OFF
FLOW
FLOW IN %
TOTALIZER
TAG NAME
OPERATING/SYSTEM CONDITIONS
FLOW BARGRAPH IN %
Factory setting:
TOTALIZER
100% VALUE
!
Note!
This function is not available unless
• the FLOW IN % option was selected in the ASSIGN LINE 1 function
or
• the FLOW IN % or FLOW BARGRAPH IN % option was selected in the ASSIGN LINE
2 function
Use this function to define the flow value to be shown on the display as the 100% value.
User input:
5-digit floating-point number
Factory setting:
Depends on nominal diameter, application and country (metric system units,
→
Page 105, or US units,
→
Page 107)
!
Note!
If a value was specified for the VALUE 20 mA function when ordering, this value is also
used here as the factory setting.
Summary of Contents for Proline Prowirl 72
