Proline Prowirl 72
10 Technical data
E Hauser
67
• Flanges:
– EN (DIN)
→
Stainless steel, 316/316L/1.4404, in conformity with NACE MR0175 and
MR0103
DN 15...150 with pressure ratings of PN 63-160 and nominal diameters of DN 200-300:
fully cast construction A351-CF3M (1.4404), in conformity with NACE MR0175 and MR0103
– Pressure rating PN250: 1.4571 (316Ti; UNS S31635); in conformity with NACE MR0175 and
MR0103
– ANSI and JIS -> Stainless steel, 316/316L, in conformity with NACE MR0175 and MR0103
– ½"...6" with pressure ratings of Cl 600, DN 15...150 with pressure rating of 40 K,
nominal diameters of 8"-12" and DN 200-300:
fully cast construction A351-CF3M, in conformity with NACE MR0175 and MR0103
– Pressure rating Cl 900…1500: 316/316L; in conformity with NACE MR0175 and MR0103
– Alloy C-22 version (EN/DIN/ANSI/JIS)
→
Alloy C-22 2.4602 (A 494-CX2MW/
N 26022); in conformity with NACE MR0175 and MR0103
• DSC sensor (differential switched capacitor; capacitive sensor):
Wetted parts (marked as "wet" on the DSC sensor flange):
– Standard for pressure ratings up to PN 40, Cl 300, JIS 40 K: Stainless steel 1.4435 (316L), in
conformity with NACE MR0175 and MR0103
– Pressure ratings PN 63...160, Cl 600, 40 K and Dualsens version:
Inconel 2.4668/N 07718 (B637) (Inconel 718), in conformity with NACE MR0175 and
MR0103
– Pressure ratings PN 250, Cl 900…1500 and butt-weld version:
titanium Gr. 5 (B-348; UNS R50250; 3.7165)
– Alloy C-22 sensor: Alloy C-22, 2.4602/N 06022, in conformity with NACE MR0175 and
MR0103
• Non-wetted parts:
– Stainless steel 1.4301 (304)
• Support:
– Stainless steel, 1.4308 (CF8)
pressure ratings PN 250, Cl 900…1500 and butt-weld version: 1.4305 (303)
• Seals:
– Graphite (Grafoil)
– Viton
– Kalrez 6375
– Gylon (PTFE) 3504
10.1.12 Human interface
Display elements
• Liquid crystal display, two-line, plain text display, 16 characters per line
• Display can be configured individually, e.g. for measured variables and status variables, totalizers
Operating elements
• Local operation with three keys (
O
,
S
,
F
)
• Quick Setup for quick commissioning
• Operating elements accessible also in Ex zones
Remote operation
Operation via:
• HART protocol
• Fieldtool (Hauser software package for complete configuration, commissioning and
diagnosis)
Summary of Contents for Proline Prowirl 72
