Endress+Hauser Proline Promass O 100HART Operating Instructions Manual Download Page 91

Page: 91 / 140

Proline Promass O 100 HART

Repair

Hauser

Repair

14.1 General notes

Repair and conversion concept

The Hauser repair and conversion concept provides for the following:

• The measuring devices have a modular design.

• Spare parts are grouped into logical kits with the associated Installation Instructions.

• Repairs are carried out by Hauser Service or by correspondingly trained

customers.

• Certified devices can be converted into other certified devices by Hauser Service

or at the factory only.

Notes for repair and conversion

For repair and modification of a measuring device, observe the following notes:

• Use only original Hauser spare parts.

• Carry out the repair according to the Installation Instructions.

• Observe the applicable standards, federal/national regulations, Ex documentation (XA)

and certificates.

• Document every repair and each conversion and enter them into the

W@M

life cycle

management database.

14.2 Spare parts

Measuring device serial number:

• Is located on the nameplate of the device.

• Can be read out via the

Serial number

parameter in the

Device information

submenu (→  87).

14.3 Hauser services

Contact your Hauser Sales Center for information on services and spare

parts.

14.4 Return

The measuring device must be returned if repairs or a factory calibration are required, or if

the wrong measuring device has been ordered or delivered. According to legal regulations,

Hauser, as an ISO-certified company, is required to follow certain procedures

when handling returned products that are in contact with medium.
To ensure swift, safe and professional device returns, please read the return procedures

and conditions on the Hauser website at

www.services.endress.com/return-material

14.5 Disposal

14.5.1 Removing the measuring device

1. Switch off the device.
2.

WARNING!

Danger to persons from process conditions. Beware of hazardous process

conditions such as pressure in the measuring device, high temperatures or aggressive

fluids.

Summary of Contents for Proline Promass O 100HART













































































































































Search results

Summary of Contents for Proline Promass O 100HART

Reviews:

Related manuals for Proline Promass O 100HART

Brands by name

Popular brands

Endress+Hauser Proline Promass O 100HART, Operating Instructions Manual

Search results

Summary of Contents for Proline Promass O 100HART

Reviews:

Related manuals for Proline Promass O 100HART

Brands by name

Popular brands